EPS Block Molding Machine is used to make EPS blocks, then cut to sheets for house insulation or packing. Popular products made from EPS sheets are EPS sandwich panels, 3D panels, inner and outer wall insulation panels, glass packing, furniture packing etc. It is suitable for small capacity request and low density blocks production, it's economic EPS machine. With special technology, our Air Cooling Block Molding Machine can make 4g/l density blocks, block is straight and of good quality.
Machine features:
1. The machine adopts Mitsubishi PLC and Winview touch screen for automatic mould opening, mould closing, material filling, steaming, temperature keeping, air cooling, demoulding and ejecting.
2. Machine's all six panels are through heat treatment to release welding stress, so that panels cannot deform under high temperature;
3. Mould cavity is made of special aluminum alloy plate with high-efficiency heat conduction, aluminum plate thickness 5mm, with Tef coating for easy demoulding
4. The machine set up high-pressure blower for suction material. Cooling is done by convection air by blower.
| Item |
Unit |
PB2000A |
PB3000A |
PB4000A |
PB6000A |
| Mould Cavity Size |
mm |
2040*1240*630 |
3060*1240*630 |
4080*1240*630 |
6100*1240*630 |
| Block Size |
mm |
2000*1200*600 |
3000*1200*600 |
4000*1200*600 |
6000*1200*600 |
| Steam |
Entry |
Inch |
DN80 |
DN80 |
DN100 |
DN150 |
| Consumption |
Kg/cycle |
18~25 |
25~35 |
40~50 |
55~65 |
| Pressure |
Mpa |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
| Compressed Air |
Entry |
Inch |
DN40 |
DN40 |
DN50 |
DN50 |
| Consumption |
m³/cycle |
1~1.2 |
1.2~1.6 |
1.6~2 |
2~2.2 |
| Pressure |
Mpa |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
| Drainage |
Steam Vent |
Inch |
DN100 |
DN150 |
DN150 |
DN150 |
| Capacity 15kg/m³ |
Min/cycle |
4 |
5 |
7 |
8 |
| Connect Load/Power |
Kw |
6 |
8 |
9.5 |
9.5 |
Overall Dimension
(L*H*W) |
mm |
3800*2000*2100 |
5100*2300*2100 |
6100*2300*2200 |
8200*2500*3100 |
| Weight |
Kg |
3500 |
5000 |
6500 |
9000 |
){kind=link}