EPS Air cooling block molding machine is suitable for small capacity request and low density blocks production, it's economic EPS machine. With special technology, our Air Cooling Block Molding Machine can make 4g/l density blocks, block is straight and of good quality.
Main Features:
1,Strong Structure:
Machine is made of high-strength square tubes and thick steel plates.
Machine's all six panels are through heat treatment to release welding stress, so that panels cannot deform under high temperature.
After heat treatment, all panels are processed by sand blasting treatment t remove rust, then first painting and final painting is done to keep machine anti-corrosion.
2,Steam System:
Use three ball valves to control steam, saving 20% steam comparing to traditional one main valve system.
Steaming is controlled by Timer and three Germen electrical gauge switches, with a safty valve to save from gauge malfuncton situation.
3,Control System:
Machine with PLC and touch screen for easy operation.
| Item |
Unit |
PB2000A |
PB3000A |
PB4000A |
PB6000A |
| Mould Cavity Size |
mm |
2040*1240*630 |
3060*1240*630 |
4080*1240*630 |
6100*1240*630 |
| Block Size |
mm |
2000*1200*600 |
3000*1200*600 |
4000*1200*600 |
6000*1200*600 |
| Steam |
Entry |
Inch |
DN80 |
DN80 |
DN100 |
DN150 |
| Consumption |
Kg/cycle |
18~25 |
25~35 |
40~50 |
55~65 |
| Pressure |
Mpa |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
| Compressed Air |
Entry |
Inch |
DN40 |
DN40 |
DN50 |
DN50 |
| Consumption |
m³/cycle |
1~1.2 |
1.2~1.6 |
1.6~2 |
2~2.2 |
| Pressure |
Mpa |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
| Drainage |
Steam Vent |
Inch |
DN100 |
DN150 |
DN150 |
DN150 |
| Capacity 15kg/m³ |
Min/cycle |
4 |
5 |
7 |
8 |
| Connect Load/Power |
Kw |
6 |
8 |
9.5 |
9.5 |
Overall Dimension
(L*H*W) |
mm |
3800*2000*2100 |
5100*2300*2100 |
6100*2300*2200 |
8200*2500*3100 |
| Weight |
Kg |
3500 |
5000 |
6500 |
9000 |
Audited Supplier 
){kind=link}